Power Absorption Unit consists of a wet drum brake unit, hydraulically activated & water cooled.

Torque is transferred to a torque bar, then measured electronically through a computer readout displaying power (HP/kW) or torque (ft.lb/Nm) & torque rise.

Every year, more buyers choose the high torque, high horsepower AW dynamometer


Features
Bullet point image Ability to test 720 hp @ 1000 rpm (800 hp quick test)
Bullet point image Massive 4000 ft/lbs (5500 Nm) of torque capability
Bullet point image Bi-rotational - can test either rotation
Bullet point image DynoPro 2100S computer & printer (see below)
Bullet point image Calibration is an easy one man operation done on site (no need to send away)
Bullet point image Machine is a heavy duty unit & is very low maintenance
Bullet point image Unit is portable & on wheels - weighing 748 kg after draining water ballast (water ballast also used as cooling reserve)
NEW DynoPro 2100S Computer & Printer

Displays power, torque and torque rise with easy calibration
Displays imperial (hp ft/lbs) or metric (kW Nm) through a simple touch menu setup.

ETS software for external computer such as laptop available. 

 DynoPro 2000 Computer Sample Report
DynoPro 2100S Computer Sample Print Report of a 158 pto hp tractor with a 41% torque rise at 50 rpm intervals (run time is no longer recorded on 2100S)
Optional
RTX Remote & Smart Load

Auto adjust for constant RPM / torque Set-Point ability
(Set on 1000 rpm, stays on 1000 rpm)
Real time data display

Operate the dyno from tractor cab!		 RTX Remote & Smart Load
Optional
AW Engine Test System (ETS)

Computer software that enables reports,
graphs and full test data.
Connects directly from dyno's digital display to an external PC ( i.e. laptop) 		AW Engine Test System (ETS)
Optional
AW Options
Bullet point image High Speed Drive Shaft
Bullet point image Shield Package
Bullet point image Universal Adaptor for engine testing
   
Shield Package
NEB Series Australian
Recommended Charge Out Rate		 New Zealand
Recommended Charge Out Rate		 Torque Requirements

COOLING REQUIREMENT GUIDE
Litres per Minute Required - for continuous testing

Incoming
water temp

 100HP
75kW		 200HP
 150kW		 300HP
225kW		 400HP
300kW		 500HP
375kW		 600HP
450kW		 700HP
525kW		 800HP
600kW		 900HP
675kW		 1000HP
 750kW
40oF    5oC 19 38 57 75 95 115 135 150 170 190
50oF    11oC 23 45 70 90 115 140 160 185 205 230
60oF    16oC 27 54 80 105 135 160 190 215 245 270
70oF    22oC 30 60 90 120 150 180 210 240 270 300
80oF    27oC 36 70 100 135 170 200 240 270 305 340
90oF    33oC 40 80 115 150 190 230 265 300 340 380
100oF   38oC 52 100 150 200 250 300 350 400 450 500
110oF   44oC 68 130 195 260 325 390 455 520 585 650

Please note: Due to ongoing developments specifications may change.

A.M.D.S. has full Technical Info, Parts & Service backup ensuring AW owners receive the service they deserve
A.M.D.S. is the distributor for the Australia - New Zealand region

Contact Information
For further details or a quote please contact
Chris Smith
Phone: (02) 6921 2011
Email: dyno@amds.com.au or dyno@amds.co.nz

© 2012 Australasian Machinery Dealer Services Pty Ltd